Why do you need a gas detector?
In the process of industrial production, flammable, toxic, harmful gas leakage occurs from time to time, will cause serious threats to personnel, equipment, production, life. The main causes of leakage are:
1. Material defects in production equipment or containers.
2. The sealing ring and the sealing ring are not tightly sealed.
3. The welding place of the container is subjected to electrochemical corrosion for a long time.
4. Human negligence, etc.Leaking flammable or toxic gases are quickly diluted by air, so the location of the leak is difficult to find and even more difficult to quantify.
Over time, these gases can build up in certain areas or in certain blind spots. When the content of combustible gas in the air reaches a certain value, it is easy to burn or explode in the presence of open fire. If this very dangerous hidden danger can not be found in time, it will bring great loss to personal safety and property.We can use a gas detector to monitor.
How to choose the right gas detector?
This wall-mounted gas sensor is the cheapest industrial-grade gas detector. The overall appearance of waterproof ABS plastic, which can be widely used in the harsh environment with more smoke and dust. The gas detector has RS485 and analog output of two output modes, even if long time work can also ensure stable signal and accurate measurement. The bottom of the gas detector is equipped with a waterproof temperature and humidity probe, which can meet users’ requirements of detecting temperature, humidity, and gas at the same time. In addition, multiple wall-mounted gas sensors can be installed in the industrial park, and the detection information can be uploaded to a unified free cloud platform, effectively realizing precise multi-point measurement and centralized monitoring.
What should be paid attention to when installing gas leak detector?
1.Select the installation locatio
We need to know the distribution of field working conditions and the location of gas generation, such as pipe joints, valves, raw material locations, airflow directions, etc. These are all things we need to consider carefully. That doesn’t mean you just need to find the place to install it. If installed in the wrong position, the gas detector will not work.
2.Installation environment conditions
Gas detector has its own suitable working conditions, mainly need to pay attention to humidity, temperature, pressure and other basic conditions. In general factory environment, it can be directly installed and fixed, but when we install in confined space, such as pipes, flue and other special environments, we must strictly control the working conditions. Most gas detectors can adapt to the following conditions: temperature: -20 ~ 50 degrees, humidity below 90% without condensation, pressure in the range of 100KP. Once the environmental conditions are not met, the accuracy of measurement and the service life of the instrument will be affected. At this time, it is necessary to consider adding gas pretreatment equipment for gas treatment,
If the dust in the gas is too much, it will also cause the gas sensitive element of the gas sensitive element adsorption blockage, the detection accuracy is reduced. Therefore, once used in a high dust environment, dust must be filtered and cleaned regularly as appropriate. Remember not to wash with water or wipe with alcohol or other solvents. Only clean the surface of the detector with a clean, soft cloth.More equipment welcome to consult the fine news unimpeded.