304 American Standard Butterfly Nut
https://www.szxintegu.com/products/304-american-standard-butterfly-nut/
#butterflynut
304 American Standard Butterfly Nut
A 304 American Standard Butterfly Nut, also known as a wing nut, is crafted from 304-grade stainless steel, known for its excellent resistance to corrosion and oxidation. This type of nut is distinguished by its two large, wing-like projections that allow it to be tightened and loosened by hand without the need for tools. This feature m... more304 American Standard Butterfly Nut
https://www.szxintegu.com/products/304-american-standard-butterfly-nut/
#butterflynut
304 American Standard Butterfly Nut
A 304 American Standard Butterfly Nut, also known as a wing nut, is crafted from 304-grade stainless steel, known for its excellent resistance to corrosion and oxidation. This type of nut is distinguished by its two large, wing-like projections that allow it to be tightened and loosened by hand without the need for tools. This feature makes butterfly nuts particularly useful in applications where fast, frequent adjustments or disassembly is required.
304 American Standard Butterfly Nut Load Capacity and Strength
Material Strength
304 Stainless Steel: Known for its good mechanical properties and corrosion resistance, 304 stainless steel has a tensile strength of approximately 70,000 psi (480 MPa). This makes it suitable for various applications where moderate strength and resistance to environmental factors are required.
Design and Dimensions
Dimensions: The load capacity of a butterfly nut is directly related to its size and thread dimensions. For American Standard threads, common sizes include 1/4"-20, 5/16"-18, and 3/8"-16, among others. Larger dimensions generally provide higher load capacities.
Design Features: The design of a butterfly nut, which includes wings for manual tightening, impacts its ability to handle loads. The load capacity is also affected by the thickness and overall design of the nut.
Load Capacity
General Capacity: While exact load capacities can vary based on specific dimensions and design, a general rule of thumb for standard 304 stainless steel nuts (not specifically butterfly nuts) is that they can handle a load proportional to their size and thread type. For instance, a 1/4"-20 304 stainless steel nut might handle around 500 to 800 pounds of axial load, but this can vary.
Butterfly Nut Specifics: Butterfly nuts are generally used for applications requiring frequent adjustments or where manual tightening is needed. They are not typically designed for heavy-load applications compared to other types of nuts and fasteners.
Factors Affecting Strength
Installation Conditions: Proper installation and torque application are crucial. Over-tightening can lead to damage, while under-tightening may result in a loose connection.
Environmental Conditions: Although 304 stainless steel is corrosion-resistant, extreme environments or conditions could affect its performance. For critical applications, consider using nuts specifically designed for high-strength or high-corrosion environments.
For precise load capacity and strength values, consulting manufacturer specifications or engineering guidelines specific to the butterfly nut's size and design is essential.
Specifications of 304 American Standard Butterfly Nut
M4 M5 M6 M8 M10 M12 M16 M20 M24
0.7 0.8 1 1.25 1.5 1.75 2 2.5 3
8 11 13 16 20 23 29 35 44
6 8 10 13 17 20 26 32 41
7 9 11 12.5 16.5 19.5 23 29 37.5
5.5 7.5 9 10.5 14.5 17.5 21 27 35
20 26 33 39 51 65 73 90 110
18 24 30 36 48 62 70 86 106
1.9 2.3 2.3 2.8 4.4 4.9 6.4 6.9 9.4
1.1 1.5 1.5 2 3.6 4.1 5.6 6.1 8.6
2.3 2.8 3.3 4.4 5.4 6.4 7.5 8 10.5
1.7 2.3 2.7 3.6 4.6 5.6 6.5 7 9.5
10.5 13 17 20 25 33.5 37.5 46.5 56.5
8.5 11 15 18 23 31 35 44 53.5
4.6 6.5 8 10 12 14 17 21 25
3.2 4 5 6.5 8 10 13 16 20
2 2.5 3 3 5 6 7 8 9
3 4 5 6 8 10 11 14 18
①, Material: a) Forgeable cast iron
GT: GTS or GTW is determined by the manufacturer;
b) Steel St: Forging or cold working is determined by the manufacturer;
c) Copper-zinc alloy CuZn: Forgeable alloy or cast alloy is determined by the manufacturer;
d) Austenitic stainless steel A: Grade is determined by the manufacturer
1000+ Salt Spray Corrosion Resistant Screw
https://www.szxintegu.com/products/1000-salt-spray-corrosion-resistant-screw.html
#rust #resistant #screws
1000+ Salt Spray Corrosion Resistant Screw
The 1000+ Salt Spray Corrosion Resistant Screw is specifically engineered to endure extreme conditions, making it an ideal choice for maritime, coastal, and harsh industrial environments where corrosion is a significant concern. Crafted from high-grade materials with an advanced coating, this screw ha... more1000+ Salt Spray Corrosion Resistant Screw
https://www.szxintegu.com/products/1000-salt-spray-corrosion-resistant-screw.html
#rust #resistant #screws
1000+ Salt Spray Corrosion Resistant Screw
The 1000+ Salt Spray Corrosion Resistant Screw is specifically engineered to endure extreme conditions, making it an ideal choice for maritime, coastal, and harsh industrial environments where corrosion is a significant concern. Crafted from high-grade materials with an advanced coating, this screw has been rigorously tested to withstand over 1000 hours of salt spray exposure, ensuring its durability and longevity. The enhanced corrosion resistance guarantees that the screw maintains its structural integrity and aesthetic appearance over time, reducing the need for frequent replacements and maintenance.
1000+ Salt Spray Corrosion Resistant Screw Advantages
Exceptional Durability: The high salt spray resistance indicates that the screw can withstand prolonged exposure to corrosive elements, such as saltwater, without significant degradation. This durability ensures a longer service life and reduced need for frequent replacements, which is crucial in marine, coastal, and industrial environments.
Enhanced Reliability: The screw's ability to resist corrosion for over 1000 hours ensures stable performance and integrity even in challenging conditions. This reliability is essential for maintaining the functionality and safety of assemblies, particularly in critical applications where corrosion could lead to failure or malfunction.
Reduced Maintenance Costs: The extended resistance to corrosion translates to lower maintenance and replacement costs. Fewer replacements and repairs are needed, reducing overall operational costs and downtime.
Versatility: The high corrosion resistance makes these screws suitable for a wide range of applications, including marine equipment, outdoor structures, and chemical processing, where exposure to harsh conditions is common.
Xintegu Stainless Steel Fasteners
https://www.szxintegu.com/products/
#ss #316 #fasteners
Xintegu Stainless Steel Fasteners
Shenzhen Xintegu Hardware Co., Ltd. specializes in producing an extensive range of precision hardware products, including stainless steel fasteners, customized non-standard parts, and other precision-specific components. Our products cater to diverse industries such as aerospace, automotive, electronics, and construction, where high levels of accuracy and reliability a... moreXintegu Stainless Steel Fasteners
https://www.szxintegu.com/products/
#ss #316 #fasteners
Xintegu Stainless Steel Fasteners
Shenzhen Xintegu Hardware Co., Ltd. specializes in producing an extensive range of precision hardware products, including stainless steel fasteners, customized non-standard parts, and other precision-specific components. Our products cater to diverse industries such as aerospace, automotive, electronics, and construction, where high levels of accuracy and reliability are essential. With a strong emphasis on customization, Xintegu excels in creating specialized solutions tailored to meet the unique specifications and stringent demands of our clients. Leveraging state-of-the-art equipment and a strategic location in Dongguan’s precision hardware hub, Xintegu consistently delivers products that uphold the highest standards of quality and durability.
Different Types of Fastening Products
Customized Non-Standard Fasteners
This type of products ensures that clients receive fasteners that align perfectly with their design criteria, enhancing both product performance and safety.
Standard Fasteners
Xintegu's commitment to reliability and efficiency in its standard fastener product line ensures that customers receive components that provide secure and lasting connections, enhancing the integrity and safety of their projects or products.
High-Precision Copper Parts
Crafted from high-quality copper, these parts are designed to ensure optimal performance in environments where non-ferrous materials are preferred for their superior thermal and electrical properties.
Various Featured Special Fasteners
Xintegu's focus on such specialized products highlights their commitment to solving complex engineering challenges and their ability to innovate in response to specific customer needs.
Independently Developed Fasteners
Shenzhen Xintegu Hardware Co., Ltd. showcases its innovative capabilities through its range of independently developed products, designed to meet specific industrial needs with advanced solutions.
Furniture Fasteners and Fixings
Xintegu offers a range of furniture fittings designed to meet the needs of modern furniture manufacturing and assembly.
Industrial Equipment and Accessories
Xintegu offers industrial equipment and accessories that boost productivity and quality. Their automatic packaging solutions ensure precise and efficient processes, while their range of tooling, consumables, and maintenance kits is supported by robust technical services.
Advantages of Xintegu Fastening Products and SS Fasteners
Shenzhen Xintegu Hardware Co., Ltd. offers a variety of fastening products that stand out in the market for several key reasons. The advantages of Xintegu's products include:
High-Quality Materials
Xintegu uses premium materials in the manufacturing of its products, ensuring durability, reliability, and extended service life. Materials such as high-grade stainless steel, brass, and specialized alloys are chosen for their corrosion resistance and strength, making the products suitable for a wide range of environments and applications. We focus on 304/316/316L stainless steel especially.
01
Precision Engineering
With advanced manufacturing techniques and cutting-edge equipment, Xintegu guarantees high precision in all its products. This precision ensures that components like fasteners, connectors, and custom parts fit perfectly, reducing the risk of failure and increasing the efficiency of assembly processes.
02
Customization Capability
One of the standout features of Xintegu is its ability to produce customized hardware solutions tailored to the specific needs of clients. This flexibility allows them to serve industries with very specific requirements, such as aerospace, automotive, and electronics, where non-standard parts are often necessary.
03
Stainless Steel Fasteners Application Industry
Furniture Manufacturing
Architectural Decoration
Electronic Equipment
Machinery Manufacturing
Aerospace
Automobile Manufacturing
Electronic Equipment Fasteners
https://www.szxintegu.com/electronic-fastener.html
#electronic #screws
In electronic equipment, both standard and non-standard fasteners are crucial for ensuring proper assembly, structural integrity, and functionality. The choice between standard and non-standard fasteners depends on factors such as the type of electronic device, the materials used, design specifications, and the need for customization. Here's how standard and non-standard fasteners are typica... moreElectronic Equipment Fasteners
https://www.szxintegu.com/electronic-fastener.html
#electronic #screws
In electronic equipment, both standard and non-standard fasteners are crucial for ensuring proper assembly, structural integrity, and functionality. The choice between standard and non-standard fasteners depends on factors such as the type of electronic device, the materials used, design specifications, and the need for customization. Here's how standard and non-standard fasteners are typically used in electronic equipment:
Standard Fasteners
Consistency and Compatibility
Standard fasteners, such as screws, nuts, and bolts with widely accepted dimensions, ensure consistency and compatibility in electronic equipment manufacturing. Standard fasteners are commonly used in the assembly of electronic components, circuit boards, and enclosures, providing a reliable and uniform connection.
Mass Production
Standard fasteners are well-suited for mass production processes in electronics manufacturing. For electronic devices produced in large quantities, standard fasteners streamline production, reduce costs, and facilitate efficient assembly.
Industry Standards Compliance
Standard fasteners adhere to industry standards and specifications. Compliance with industry standards is crucial for electronic equipment. Standard fasteners help meet these standards, ensuring interoperability and regulatory compliance.
Repair and Maintenance
Standardized fasteners simplify repair and maintenance processes. Using widely available standard fasteners makes it easier for technicians to disassemble and reassemble electronic devices during repair or maintenance procedures.
Non-Standard Fasteners
Customization and Specialized Applications
Non-standard fasteners allow for customization and adaptation to specific design requirements. In cases where electronic devices have unique shapes or non-traditional structures, non-standard fasteners may be used to address specific design challenges.
Miniaturization and Lightweight Design
Non-standard fasteners can be designed for miniaturized electronic components and lightweight structures. In portable electronics or devices where weight and size are critical factors, non-standard fasteners may be engineered for optimal performance without sacrificing strength.
Material Compatibility
Non-standard fasteners may be designed for use with specific materials, including lightweight alloys or advanced composites. As electronic devices incorporate diverse materials, non-standard fasteners can be tailored to match the properties of these materials, ensuring secure connections.
Innovative Design Solutions
Non-standard fasteners enable innovative and creative design solutions. For cutting-edge electronic devices with unique aesthetics or functionalities, non-standard fasteners may be employed to achieve the desired design goals.
Specialized Environments
Non-standard fasteners may be designed to withstand specific environmental conditions, such as extreme temperatures or corrosive atmospheres. In applications where standard fasteners may not provide adequate protection, non-standard fasteners can be engineered to meet the challenges of harsh environments.
In summary, standard fasteners are the go-to choice for many electronic applications due to their reliability, cost-effectiveness, and compatibility with industry standards. However, non-standard fasteners offer flexibility and customization for unique design requirements, making them valuable in specialized electronic equipment or innovative product designs. The choice between standard and non-standard fasteners in electronic equipment depends on the specific needs of the device and the goals of the design and manufacturing processes.
Automotive Fasteners
https://www.szxintegu.com/automobile-fasteners.html
#automobile #fasteners
In automobile manufacturing, the use of fasteners is crucial for assembling various components and systems, ensuring the structural integrity, safety, and functionality of vehicles. Both standard and non-standard fasteners are utilized based on engineering specifications, design requirements, and material considerations. Here's how standard and non-standard fasteners are typically used in automobi... moreAutomotive Fasteners
https://www.szxintegu.com/automobile-fasteners.html
#automobile #fasteners
In automobile manufacturing, the use of fasteners is crucial for assembling various components and systems, ensuring the structural integrity, safety, and functionality of vehicles. Both standard and non-standard fasteners are utilized based on engineering specifications, design requirements, and material considerations. Here's how standard and non-standard fasteners are typically used in automobile manufacturing:
Standard Fasteners
Industry Standards and Specifications
Standard fasteners adhere to industry standards and specifications (e.g., ISO, DIN, SAE). Standard screws, bolts, nuts, and other fasteners with widely accepted dimensions and specifications are extensively used in automobile assembly. This ensures compatibility, interchangeability, and compliance with industry regulations.
Reliability and Interchangeability
Standard fasteners provide reliability and interchangeability. Automotive manufacturers use standard fasteners for assembling various components, allowing for efficient mass production, easy maintenance, and cost-effective repairs. Interchangeability is critical for assembly line processes.
Mass Production and Cost Efficiency
Standard fasteners are cost-effective and suitable for mass production. Given the high volume of components in automotive production, standard fasteners contribute to cost efficiency. They are readily available, making them a practical choice for large-scale manufacturing.
Ease of Maintenance and Repairs
Standard fasteners simplify maintenance and repairs. Automotive service and repair operations benefit from the use of standard fasteners, as they are widely available and technicians are familiar with their specifications, allowing for quicker and more straightforward repairs.
Non-Standard Fasteners
Customization for Specific Designs
Non-standard fasteners allow for customization to meet unique design requirements. In certain components or systems with unique design specifications, non-standard fasteners may be employed to address specific challenges or to achieve specific engineering goals.
Weight Reduction Strategies
Non-standard fasteners may be designed to contribute to weight reduction. With the increasing emphasis on fuel efficiency, non-standard fasteners, especially those made from lightweight materials or with specific geometries, may be used to help reduce the overall weight of the vehicle.
Special Materials and Coatings
Non-standard fasteners may be designed for optimal performance with specific materials or coatings. Non-standard fasteners may be employed in critical applications where specialized materials or coatings are needed to enhance corrosion resistance, durability, or compatibility with specific components.
Innovative Design Solutions
Non-standard fasteners enable innovative and creative design solutions. As automotive design evolves, especially in electric vehicles and advanced safety features, non-standard fasteners may be used to accommodate new materials, unconventional shapes, or innovative manufacturing processes.
Critical Performance Applications
Non-standard fasteners may be used in applications with demanding performance criteria. For components subjected to extreme conditions, such as high temperatures or heavy vibrations, non-standard fasteners can be designed to meet specific performance requirements.
In summary, standard and non-standard fasteners both play essential roles in automobile manufacturing. Standard fasteners provide reliability, cost efficiency, and adherence to industry standards, making them suitable for large-scale production. Non-standard fasteners offer customization and innovation to address unique design challenges, contribute to weight reduction, and meet specific performance criteria in advanced automotive applications. The selection of fasteners depends on the engineering specifications, design goals, and materials involved in the manufacturing process.
Architectural Fasteners
https://www.szxintegu.com/architectural-decoration-fasteners.html
#architectural #bolt
In architectural decoration, both standard and non-standard fasteners play essential roles, each serving specific purposes based on the design requirements and materials involved. Let's explore how standard and non-standard fasteners are used in architectural decoration:
Standard Fasteners
Consistency and Uniformity
Standard fasteners, such as common screws, nails, and bolts, pro... moreArchitectural Fasteners
https://www.szxintegu.com/architectural-decoration-fasteners.html
#architectural #bolt
In architectural decoration, both standard and non-standard fasteners play essential roles, each serving specific purposes based on the design requirements and materials involved. Let's explore how standard and non-standard fasteners are used in architectural decoration:
Standard Fasteners
Consistency and Uniformity
Standard fasteners, such as common screws, nails, and bolts, provide consistency and uniformity in construction projects. They are commonly used for attaching standard architectural elements like moldings, trims, and basic fixtures where a standard and straightforward connection is sufficient.
Code Compliance
Standard fasteners often adhere to industry codes and regulations, ensuring that construction meets safety standards. When building or decorating according to established codes, standard fasteners are preferred to ensure compliance and safety in the structure.
Ease of Availability
Standard fasteners are widely available in various sizes and materials at hardware stores. For common and simple decorative applications, using readily available standard fasteners is convenient and cost-effective.
Structural Stability
Standard fasteners are designed to provide structural stability in various applications. For elements that require robust support or load-bearing capacity, standard screws, bolts, and anchors are preferred to ensure stability.
Non-Standard Fasteners
Specialized Applications
Non-standard fasteners are designed for specific, often non-traditional applications. In unique or custom architectural designs, non-standard fasteners may be necessary to accommodate unconventional shapes or materials.
Aesthetic Considerations
Non-standard fasteners may offer more design flexibility and can be chosen for their aesthetic appeal. In high-end or artistic architectural projects, non-standard fasteners may be selected to enhance the visual appeal without compromising functionality.
Material Compatibility
Non-standard fasteners may be designed for use with specific materials. When attaching decorative elements made of exotic materials or composites, non-standard fasteners may be chosen for their compatibility with those materials.
Innovative Design Solutions
Non-standard fasteners allow for innovative design solutions. In cases where conventional fasteners may not meet the design requirements, architects and designers may opt for non-standard fasteners to achieve creative and unique outcomes.
In summary, standard fasteners are reliable, widely available, and conform to established norms, making them suitable for many architectural decoration applications. Non-standard fasteners, on the other hand, offer more flexibility, catering to specific design needs and enabling innovative solutions in more customized or artistic projects. The choice between standard and non-standard fasteners depends on the project's requirements, design goals, and the materials involved.
