#Solid waste treatment after distilled from waste oil to base oil recovery plant
I)Asphalt for road construction
The oil residue after refining, also known as oil residue or asphalt, has huge economic value. Asphalt is a material commonly used in road construction that has good toughness and durability. In road construction, asphalt can be used as a pavement material that can withstand the weight and friction of vehicles while also resisting the erosion of wind, rain and ultraviolet rays. Asph... more#Solid waste treatment after distilled from waste oil to base oil recovery plant
I)Asphalt for road construction
The oil residue after refining, also known as oil residue or asphalt, has huge economic value. Asphalt is a material commonly used in road construction that has good toughness and durability. In road construction, asphalt can be used as a pavement material that can withstand the weight and friction of vehicles while also resisting the erosion of wind, rain and ultraviolet rays. Asphalt can also be used for road repair and reinforcement to extend the service life of the road.
II)Water-proof materials
Bitumen is also widely used in the production of waterproofing materials. It has good waterproof performance and durability, which can effectively prevent moisture penetration and protect buildings from moisture and damage. Therefore, asphalt is widely used in waterproofing projects on roofs, basements, bathrooms and other places.
III)Paving materials
Asphalt can also be used as a paving material. It can be mixed with gravel, sand and other materials to make paving bricks, pavement markings and parking spaces. Not only are these materials highly wear-resistant and durable, they can also resist the weight and friction of vehicles while also improving the appearance and safety of the road surface.
IV)Industrial use
In addition to the above uses, asphalt can also be used for some industrial purposes. For example, it can be used as an additive in fuel oil to improve the combustion efficiency and calorific value of fuel oil; it can also be used to make coatings, paints and other materials; it can also be used as an additive in rubber products to improve the toughness and durability of rubber products.
Heat exchanger is one of the two important devices in oil refinery industry. Each type of VBOLT heat exchanger is accurately calculated by the engineer team.
1.Efficiency of heat exchanger determines oil recovery rate.
2.Reducing energy consumption.
3.Saving operating costs.
－HEAT EXCHANGERS CALCULATIONS:
The main basic Heat Exchanger equation is:
Q=UxAxΔTm=
The log mean temperature difference ΔTm is:
ΔTm=(T1-t2)-(T2-t1)=°F
Where:
T1=Inl... moreDO NOT UNDERESTIMATE THE HEAT EXCHANGER
Heat exchanger is one of the two important devices in oil refinery industry. Each type of VBOLT heat exchanger is accurately calculated by the engineer team.
1.Efficiency of heat exchanger determines oil recovery rate.
2.Reducing energy consumption.
3.Saving operating costs.
－HEAT EXCHANGERS CALCULATIONS:
The main basic Heat Exchanger equation is:
Q=UxAxΔTm=
The log mean temperature difference ΔTm is:
ΔTm=(T1-t2)-(T2-t1)=°F
Where:
T1=Inlet tube side fluid temperature;
TemperutareiC
t2=Outlet shell side fluid temperature;
T2=Outlet tube side fluid temperature;
t1=Inlet shell side fluid temperature.
can be rearranged to become:
A=Q/(UxΔTm)=
Where:
A=Heat transfer area(m2)(ft2);
Q=Heat transfer rate (kJ/h) (Btu\h);
U=Overall heat transfer coefficient(kJ/h.m2.°C)(Btu/h°F);
ΔTm=Log mean temperature difference(°C)(°F).
And:
Ct=Liquid specific heat,tube side(kJ/kg° K)(Btu/lb°F);
Cs=Liquid specific heat,shell side(kJ/kg°K)(Btu/lb°F).
Waste oil refers to the waste oil that is replaced from various machinery, vehicles and ships. Lubricating oil due to external pollution in the process of use to produce a large number of gum, asphaltene, sulfur, nitrogen, oxygen compounds to reduce and even lose its due effect and be discarded, according to statistics, the global annual production of waste oil is about 45 million tons, the market value of more than 43 billion dollar, but because of its own economic value is abnormally low, it h... moreWaste oil refers to the waste oil that is replaced from various machinery, vehicles and ships. Lubricating oil due to external pollution in the process of use to produce a large number of gum, asphaltene, sulfur, nitrogen, oxygen compounds to reduce and even lose its due effect and be discarded, according to statistics, the global annual production of waste oil is about 45 million tons, the market value of more than 43 billion dollar, but because of its own economic value is abnormally low, it has always been in the "waste" status. And every year to get rid of it, it is dumped or burned. This is not only the problem of large-scale environmental pollution, but more importantly, it involves the global energy crisis.
So, is there a technology or equipment that can make waste oil and waste diesel "become" high-quality diesel, providing a new way to solve the environmental pollution problem of waste oil and save energy?
Vbolt engineer Jay led the team, after years of unremitting efforts, has overcome a number of recognized technical problems in the industry, the establishment of their own production line, the manufacture of waste oil recycling diesel double-stage intelligent control equipment.
Chongqing Vbolt Machinery Co., Ltd，the main products include waste Oil to base oil distillation machine,waste oil to diesel Recycled machine,discolorizeration & desulfurization machine and base oil solvent extraction plant.
