As a motorcycle enthusiast, undertaking basic maintenance tasks can be both rewarding and cost-effective. One such task is flushing the coolant system. Taverner Motorsports, Australia's trusted source for motorcycle expertise, provides insights on how to flush your motorcycle coolant.
Is It Feasible?
Yes, with the right tools and knowledge, you can flush your motorcycle coolant. It’s essential to understand the process and use quality products to ensure the best results.
Tools and Materials Needed
Before you start, gather the necessary tools and materials. You’ll need the following:
- Replacement coolant
- A drain pan
- A funnel
- A wrench
- A screwdriver
- Shop rags
- Distilled water
Step-by-Step Guide
Step 1: Prepare Your Motorcycle
Place your motorcycle on a stable surface. Ensure that the engine is cool to avoid burns from the hot coolant. Remove the fairings if necessary to access the radiator and coolant reservoir.
Step 2: Drain The Old Coolant
Place a drain pan under the radiator. Locate the drain bolt, usually found at the bottom of the radiator, and use a wrench to open it. Allow the coolant to drain into the pan.
Step 3: Flush the System
Once the old coolant is drained, close the drain bolt. Fill the radiator with distilled water. Start the motorcycle for a few minutes, then turn it off and let it cool. Drain the water. This step helps to flush out any remaining coolant or debris.
Step 4: Add New Coolant
After the system is flushed, make sure the drain bolt is closed tightly. Use a funnel to add the new coolant to the radiator. Reinstall any fairings you removed earlier.
Step 5: Check and Dispose
Start the motorcycle to check for leaks. Make sure to dispose of the old coolant responsibly, as it’s hazardous to the environment.
Boost Your Motorcycle’s Health
Flushing your motorcycle coolant is an attainable DIY project that can contribute to the performance and longevity of your bike. Taverner Motorsports recommends using a high-quality coolant and following the steps carefully for a successful coolant change. Taverner Motorsports can also assist and completely flush the coolant out of your radiator for a thorough service.