If you're experiencing issues with your garage door, you're not alone. Many homeowners encounter problems with their overhead doors that require repairs. In this article, we will discuss common garage door issues and provide tips on how to fix them. Maverick Overhead Door, a trusted family-owned company serving Marshall, Longview, Carthage, and all of East Texas, specializes in garage door repair, custom garage door installation, and spring replacement.
Common Garage Door Issues
1. Noisy Operation
Is your garage door making loud and unpleasant noises when it opens or closes? This could be due to worn-out rollers, loose hardware, or lack of lubrication. To fix this issue, try tightening all hardware, lubricating moving parts with a silicone-based lubricant, and replacing worn-out rollers.
2. Door Off Track
If your garage door has come off track, it can be a serious safety hazard. Avoid attempting to realign the door yourself, as this can cause further damage. Contact Maverick Overhead Door for professional assistance in fixing the alignment of your garage door.
3. Broken Springs
Broken garage door springs are a common issue that can prevent your door from opening or closing properly. This is a repair that should only be handled by experienced professionals, as it can be dangerous to attempt on your own. Maverick Overhead Door offers expert garage door spring installation services to ensure your door operates safely and smoothly.
4. Malfunctioning Remote Control
If your garage door remote control is not working, the first step is to check the batteries. If replacing the batteries does not solve the issue, try reprogramming the remote according to the manufacturer's instructions. If the problem persists, it may be time to replace the remote or seek professional help.
5. Uneven Closing
Is your garage door closing unevenly or not closing all the way? This could be due to misalignment of the photo-eye sensors or an issue with the closing force. Check to make sure the sensors are clean and aligned properly, and adjust the closing force settings as needed to ensure proper operation.