Aluminium Plate has a great affinity towards oxygen which it forms a protective layer of oxide on the surface. It has a density lower than those of other common metals, at approximately one third that of steel. It is soft, non-magnetic and ductile. Aluminium sheet crystallizes in the face-centred cubic structure. They are an excellent conductor of heat and electricity. Its thermal conductivity is about half that of copper and its electrical conductivity is about its two-third. anodizedaluminum sheet is simply a combination of carbon fiber filaments in a matrix material.

It is an electrochemical process that converts its surface into a durable, corrosion-resistant, decorative, anodic oxide finish and it is ideally suited for it. Aluminium chequered plate is a metal stock with a regular pattern of lines or raised diamonds on one side, with the reverse side being without features. They are also as aluminium checker plate and aluminium tread plate. Aluminium chequered plate are also as aluminium checker plate and aluminium tread plate. It is a metal stock with a regular pattern of lines or raised diamonds on one side, with the reverse side being without features.

Aluminium Patterned Sheet eliminates defects like oil canning which can be reduced by using the patterned finishes to provide improved optical flatness thus making the product ideal for cladding system. They are manufactured by cold rolling various patterns. Its finishes provide a large selection of random and symmetrical designs that are modern and attractive in appearance. powder coated aluminum sheet used to apply decorative and protective finishes to aluminium profiles through a process that electrostatically charges the powder consisting of a mixture of finely milled resin and pigment.

 

Specification Schedule of Aluminium Sheets & Plates

Specifications ASTM / ASME SB209
Size 1000 x 60610, 1220 x 2440, 1500 x 3000, 60610 x 60610, 60610 x 4000
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Thickness 0.1 to 12 mm Thk
Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Chemical Properties of Aluminium Sheets & Plates

Alloy % Si % Cu % Fe % Mg % Mn % Cr % Zn % Ti % Others % Al
EN AW-1050 A 0.25 Maximum 0.05 Maximum 0.40 Maximum 0.05 Maximum 0.05 Maximum   0.07 Maximum 0.05 Maximum   99.5 Min
EN AW-1070 A 0.20 Maximum 0.03 Maximum 0.25 Maximum 0.03 Maximum 0.03 Maximum   0.07 Maximumimum 0.03 Maximum   99.7 Min
EN AW-1100 Si+Fe 0.95 Maximum 0.05 – 0.20     0.05 Maximum   0.10 Maximum 0.05 Maximum   99.0 Min
EN AW-2011 0.40 Max 5.00 – 6.00 0.70 Max       0.30 Max   Bi : 0.20 – 0.60 Pb : 0.20 – 0.60 Remainder
EN AW-2014 0.50 – 1.20 3.90 – 5.00 0.70 Max 0.20 – 0.80 0.40 – 1.20 0.10 Max 0.25 Max 0.15 Max   Remainder
EN AW-2024 0.50 Max 3.80 – 4.90 0.50 Max 1.20 -1.80 0.30 – 0.90 0.10 Max 0.25 Max 0.15 Max 0.15 Max Remainder
EN AW-3003 0.60 Max 0.05 – 0.20 0.70 Max   1.00 – 1.50   0.10 Max   0.15 Max Remainder
EN AW-3103 0.50 Maximum 0.10 Maximum 0.70 Maximum 0.30 Maximum 0.90 – 1.50 0.10 Maximum 0.20 Maximum 0.10 Maximum   Remainder
EN AW-6101A 0.30 – 0.7 0.05 Maximum 0.40 Maximum 0.40 – 0.90 0.03 Maximum       0.10 Maximum Remainder
EN AW-6005 0.60 – 0.90 0.10 Max 0.35 Max 0.40 – 0.60 0.10 Max 0.10 Max 0.10 Max 0.10 Max   Remainder
EN AW-6351 0.70 – 1.30 0.10 Maximum 0.50 Maximum 0.40 – 0.80 0.40 – 0.80   0.20 Maximum 0.20 Maximum 0.15 Maximum Remainder
EN AW-6060 0.30 – 0.60 0.10 Maximum 0.10 – 0.30 0.35 – 0.60 0.10 Maximum 0.05 Maximum 0.15 Maximum 0.10 Maximum   Remainder
EN AW-6061 0.40 – 0.80 0.15 – 0.40 0.70 Max 0.80 – 1.20 0.15 Max 0.04 – 0.35 0.25 Max 0.15 Max   Remainder
EN AW-6063 0.20 – 0.60 0.10 Max 0.35 Max 0.45 – 0.90 0.10 Max 0.10 Max 0.10 Max 0.10 Max   Remainder
EN AW-6082 0.70 – 1.30 0.10 Max 0.50 Max 0.60 -1.20 0.40 – 1.00 0.25 Max 0.20 Max 0.10 Max   Remainder

Mechanical Properties of Aluminium Sheets & Plates

Alloy Temper Yield Strength (Mpa) UTS (Mpa) Elongation (%)
  Minimum Maximum Minimum Maximum A 50mm (Minimum)
EN AW-1050 A Sheet F 20   60   23
O 20   60 95 23
EN AW-1070 A F 20   60   23
EN AW-1100 O     75 110 25
EN AW-2011 Sheet T4 125   275   12
T6 230   310   6
EN AW-2014 O   135   250 10
T4 230   370   11
T6 370   415   5
EN AW-2024 Perforated Sheet O   150   250 10
T3,T3510,T3511 290   395   6
T8,T8510,T8511 380   455   4
EN AW-3003 Mesh Sheet F 35   95   20
O 35   95 135 20
EN AW-3103 Sheets F 35   95   20
O 35   95 135 20
EN AW-6101A Shim Sheet T6 170   200   8
EN AW-6005 Sheet T4 90   180   13
T6 225   270   6
EN AW-6351 Sheet O   110   160 12
T4 110   205   12
T6 250   290   6
EN AW-6060 T4 60 14 120   12
T5 120   160   6
T6 150   190   6
T64 120   180   10
T66 160   215   6
EN AW-6061 O   110   150 14
T4 110   180   13
T6 240   260   6
EN AW-6063 O       130 16
T4 65   130   12
T5 130   175   6
T6 170   215   6
T66 200   245   6
EN AW-6082 O   110   160 12
T4 110   205   12
T5 230   270   6
T6 250   290   6

Equivalent Standard of Aluminium Sheets & Plates

European Standard OLD WNr UNS ISO USA (AA) GERMANY (DIN)
AW-AlCu4Mg1 AU4G1 3.0517 A93003 AlCu4Mg 3003 AlCuMg2
ASME SFA5.3 (E3003) ASTM B234 ASTM B345 AWS A5.3 (E3003) QQ A-200/1
ASTM B209 ASTM B241 ASTM B404 MIL A-52174 QQ A-225/2
ASTM B210 ASTM B247 ASTM B483 MIL E-15597 (MIL-3003) QQ A-250/2
ASTM B211 ASTM B313 ASTM B491 MIL P-25995 QQ A-430
ASTM B221 ASTM B316 ASTM B547 MIL S-12875 QQ WW-T-700/2
Comments (0)
No login
Login or register to post your comment
arrow_back