The D-PE-OE-23 Dell PowerEdge Operate 2023 Exam is an updated and enhanced exam that has replaced the DES-4122 exam. Dell PowerEdge Operate 2023 D-PE-OE-23 Dumps are designed to assist you in preparing for your D-PE-OE-23 exam, ensuring you have all the necessary knowledge and skills to succeed. Passcert is here to support you with the latest Dell PowerEdge Operate 2023 D-PE-OE-23 Dumps that cover all the exam objectives in detail, providing you with a complete and thorough understanding of the exam content. With Passcert Dell PowerEdge Operate 2023 D-PE-OE-23 Dumps, you can confidently approach your exam and increase your chances of passing with flying colors.

The Dell PowerEdge Operate 2023 Exam assesses proficiency in implementing, configuring, upgrading, maintaining, and troubleshooting Dell PowerEdge Server products. It consists of two parts: Part 1 is a comprehensive assessment with 50 questions to be answered in 90 minutes, requiring a minimum score of 63%. Part 2 is a simulation-based assessment with 6 scenarios to be completed in 30 minutes, requiring a minimum score of 66%. Passing both parts validates competence in handling Dell PowerEdge Server products and enhances professional profile.

 

● Define chassis form factors and numbering nomenclature

● Identify sever features and specifications

● Position the server in the market landscape

 

● Define the different processor, memory options, and memory configurations

● Identify power options and redundancy features, thermal features, and liquid cooling

● Explain how expansion cards are connected and the features of the GPU, NDC, LOM, and OCP options

● Define storage options, Drives, PERC, IDSDM, and BOSS

● Analyze server security features

 

● Define the function of the iDRAC, login procedures, licensing, and connection methods

● Explain the management interface options - LCC, racadm, OMSA, iSM, OME

● Define in-band and OOB management and at-the-box-management

 

● Verify health status and iDRAC license

● Configure BIOS, Storage, virtual media, networking, user access, lockdown mode and group management

 

● Analyze the visual indicators on server components - system ID, PSU, and BLINK

● Explain Easy Restore, diagnostic utilities, and hardware diagnostic options

● Export an SCP file and run a log collection

● Explain Configuration Validation, crash capture, and minimum to POST

● Explain the server logs and memory error

 

1. A server is configured in a 1+1 power configuration with both PSUs connected to a single PDU. Which redundancy options does this configuration supply?

A. PSU redundancy only

B. PSU redundancy and PDU redundancy

C. No redundancy unless each PSU is connected to a separate PDU

D. PSU redundancy and Grid redundancy

Answer: A

 

2. A technician needs to configure a server to allow the OS to manipulate processor frequencies for higher power efficiency. Which setting can they enable to achieve this?

A. Logical Processing

B. Performance per Watt (DAPC.

C. Adjacent Cache Line Prefetch

D. Performance per Watt (OS)

Answer: D

 

3. A technician is replacing a fan on a mission critical PowerEdge R740 server that needs to stay operational. The server has no LCD. How can the technician determine which fan needs to be replaced?

A. Run embedded diagnostics to locate the failing fan

B. Access the Lifecycle Controller, navigate to the System > Cooling section to locate the failing fan number

C. Remove the chassis cover and observe a fan with an amber LED

D. Use the iDRAC GUI to locate failing fan number

Answer: D

 

4. How can a system administrator compare the currently installed hardware to the original system configuration?

A. Pull a SupportAssist Collection Comparison Report

B. Restore the original System Profile

C. View Factory Shipped Inventory

D. Export a Tech Support Report

Answer: C

 

5. A technician receives a repurposed PowerEdge server. After racking and cabling the server, they attempt to log into the iDRAC but cannot do so. The default login account has been disabled.

What method can be used to enable the default login account?

A. Run the racadm racreset command from the host OS

B. Boot to F2 and select iDRAC Settings > Reset iDRAC configurations to defaults all

C. Hold down the i button for 16 seconds

D. SSH into the iDRAC and run the racadm racreset command

Answer: B

 

6. A new Dell customer is ordering servers that have very specific firmware dependencies. Any replaced parts of the same type must match the replaced original part identically. The procedure must be as simple as possible with minimal risk.

What action should a technician take to accomplish this goal?

A. Enable the Collect System Inventory On Restart (CSIOR) attribute

B. Enable the Match Firmware of Replaced Part setting in the system BIOS

C. Configure servers to access the remote firmware repository

D. Install and configure a repository manager

Answer: A

 

7. A technician is deploying a server. What should they do once the server is fully configured and deployed?

A. Switch on write-protect for the vFlash SD card

B. Back up the server profile and reset the iDRAC to Default Settings

C. Back up the server profile and configure the Parts Replacement feature

D. Change the iDRAC secure password based on the users’ company policies

Answer: D

 

8. A technician installs a NIC on a single CPU server. However, the NIC is not detected when they power on the server. What should the technician verify to make sure that the NIC is detected correctly?

A. NIC driver is up to date

B. System Setup is set to BIOS boot mode

C. NIC is installed in an expansion slot managed by the single CPU

D. Network cable is plugged into the newly installed NIC

Answer: C

 

9. What is required to use the Quick Sync 2 feature?

A. OpenManage Mobile app

B. Type A/A USB cable

C. NFC

D. Ethernet connection to iDRAC NIC

Answer: A

 

10. A technician wants to configure the iDRAC on a new server using the iDRAC Quick Sync 2 feature. What is required to use this feature?

A. OpenManage Mobile App installed on an Android or iOS device

B. OpenManage Mobile App installed on a laptop

C. Quick Sync enabled bezel

D. iDRAC Enterprise license

Answer: A