Introduction
Black algae is among the most challenging and frustrating problems for pool owners, particularly those with large pools. Have you spotted dark spots or patches in your pool? An automatic pool cleaner robot is required for fast, simple removal of black algae, providing simplified pool cleaning. In this article, we’ll guide you through removing black algae and using pool cleaning robots and products like Beatbot to bring your pool back to its sparkling self.
What Is Black Algae?
Black algae (black spot algae) is a type of algae that manifests itself as dark, greenish-black blotches on pool surfaces. It’s tough to remove because it takes a deep root, anchoring itself to the pool’s surface, especially if it is rough or porous, like concrete or plaster. The presence of these algae is more common in larger pools with complex designs, as it flourishes in regions of low water circulation and/or lack of filtration.
How Do You Get Black Algae in Pools?
There are a few reasons why you might find black algae in your pools:
Poor Water Flow: Black algae can flourish in pool areas with poor water flow, such as corners and steps.
Chemical Imbalances: Pools whose chemicals are not adequately balanced will attract algae. Conditions are perfect for algae to thrive with low chlorine, high pH, or improper filtration.
Porous Surface of the Pool: Black algae has a good grip on the pool's rough or porous surface, so scrubbing will not remove it.
Inadequate Maintenance: If you fail to clean your pool regularly, note pool chemistry and clean water levels; algae spores will settle, eventually taking root and leading to an algae outbreak.
How to Kill Black Algae in Your Swimming Pool？
Removing black algae from your pool takes time, but this method is correct. Here are the steps you can take to effectively kill it and keep your pool clean and algae-free.
Brush the Affected Areas
The initial step in fighting black algae is to brush the regions where you see the dark spots. Loosen the algae from the surface using a stiff-bristled brush made specifically for pool cleaning. Concentrate on any rough or textured areas of your pool surface; this is where algae attach to and roots.
Tip: Use a brush with stainless steel bristles to help dig deeper into the surface for concrete or plaster pools.
Use a Robot Pool Cleaner
Now that you have loosened the algae, it’s time to vacuum it all up. This is also where you can use a robot pool cleaner like the Beatbot AquaSense Pro to help you save time and effort. It is equipped with a highly sophisticated cleaning mechanism that is best for cleaning the pool, capable of climbing very well surface cleaning and collecting debris, including black algae. This self-cleaning automates the process better than hand scrubbing, especially in larger pools where algae can accumulate in hard-to-reach areas.
The Beatbot AquaSense’s smart navigation ensures that algae and other contaminants are removed with the force of the AquaSense’s powerful suction, and you don’t even have to pick up a finger.
Apply Algaecide
After brushing and vacuuming the pool, it’s time to use a pool-specific algaecide that targets black algae. Be sure to find an algaecide that explicitly targets black algae, as standard algaecides may not be potent enough.
Refer to the manufacturer’s guidelines for the correct dosage and method of application. Ensure you use the algaecide directly where black algae are present and leave it for a few hours to kill the algae.
Shock Your Pool
Pool shocking is a temporary but effective increase in chlorine levels that can also kill lingering spores of algae or bacteria. Always ensure the filtration system runs when shocking the pool to help that chemical circulate the water.
Tip: Use a high-quality pool shock product and balance the water chemistry later. Run the pool pump for a few hours to let the chemicals circulate.
Vacuum the Pool Again
After shocking, run a pool cleaner (such as the Beatbot AquaSense Pro) to vacuum up the algae and debris. This will ensure that all organic matter has been removed from the pool and stop any additional algae growth.
You can also use a pool vacuum robotic for an in-depth clean. This will help alleviate algae debris, which would otherwise lead to unneeded blockage, making it harder for the pool to clean itself and filter out any unwanted material.
Test The Water Regularly
Proper pool chemistry is essential to keeping black algae from returning. Test (and balance) the level of chlorine, pH, alkalinity, and calcium hardness regularly. Maintaining these levels will keep the water undesirable to algae.
As an added tip, a skimmer and pool vacuum are also useful tools for keeping the pool free from debris and organic material that may encourage algae growth.
Prevent Black Algae from Taking Over Lead to Prevention
Frequent Brush and Vacuum pool to Keep it Clean: Use a robotic pool cleaner such as Beatbot AquaSense to keep your pool clean and algae free in hard to reach hiding places.
Maintain Good Water Flow: Check that your pool's pump and filtration system are working correctly and that there is adequate water circulation.
Monitor Pool Chemistry Regularly; water testing is essential to maintaining the balance of chemicals in the water, especially chlorine.
Use a Pool Skimmer: The skimmer removes leaves and debris from the surface and prevents them from creating algae as they decompose in the water.
Conclusion
Black algae removal might seem challenging in your pool, especially in trading pools, but with a proper set of tools and how you approach it, it will be effective. One way to combat black algae more effectively is to invest in a robot pool cleaner, like the Beatbot AquaSense Pro, which can handle the job, saving you time and energy. Brush and clean the affected area, put the suitable algaecide, shock the pool, and use a strong vacuum to collect the algae. Regular pool care and correct water chemistry are essential to keep black algae from returning, letting you enjoy a clean, sparkling pool all season.