https://www.ericwchem.com/products/byk-104s.html
#byk #p #104 #s
Controlled flocculation wetting dispersant for solvent medium to high polar coatings to prevent titanium dioxide when mixed with color pigments; containing silicone to improve floating color behavior.
On-Product Information of BYK 104s
Chemical composition
Solution of low molecular weight unsaturated polycarboxylate polymer with polysiloxane copolymers.
Typical materialized data
The data presented on this data page are only... morehttps://www.ericwchem.com/products/byk-104s.html
#byk #p #104 #s
Controlled flocculation wetting dispersant for solvent medium to high polar coatings to prevent titanium dioxide when mixed with color pigments; containing silicone to improve floating color behavior.
On-Product Information of BYK 104s
Chemical composition
Solution of low molecular weight unsaturated polycarboxylate polymer with polysiloxane copolymers.
Typical materialized data
The data presented on this data page are only typical values, not technical indicators of the product.
Acid value: 150 mgkoh/ g density (20°c): 0.95g / ml
Non-volatile fraction (10 min., 150 °c): 50% solvent: Xylene / diisobutylketone 9 / 1
Flash point: 28°c
Current status of food contact regulations
To understand the food contact regulatory status of the product, please contact our product safety department or visit the website at www. byk.com.
Storage and transportation
Stri nation and turbidity may occur during transport and storage, heated to 30-60 ˚ c and fully mixing before use.
Special reminder
The compatibility is limited in coating systems with gasoline solvent or diluted with gasoline solvent. The auxiliary agent also contains no polysiloxane copolymer variety, namely BYK-P 104.
Application Area of BYK 104s
Coating industry
Features and advantages
BYK-P104 s is particularly suitable for medium to high polar coating systems to prevent the floating color of titanium dioxide when mixed with color pigments. It has limited compatibility with gasoline solvents.
In many cases, corrosion protection is improved when used in preservative primers. BYK-P104 s also contains small amounts of polysiloxane copolymer to improve floating hair behavior.
This ingredient prevents the formation of the benard vortex, increasing the smooth and smooth surface, and the orientation of the extinction powder and aluminum powder pigments. In most cases, there is no need to add additional silicone additives necessary in conventional formulas.
Suggested dosage
The amount of additives (purchased form) is based on:
Inorganic pigment: 3-10% titanium dioxide: 0.5-2.5% organic pigments: 10-20%
The above recommended amount is for reference, and the optimal amount should be determined through a series of tests.
Add method and processing guidance
To achieve optimal performance, the additives must be added to the abrasives and then to the pigment.
https://www.ericwchem.com/products/byk-024-defoamer-cas-no-56346-34634634.html
#byk #024 #msds
Silicone defoamer, voc-free, used in water-based latex paints, printing inks, varnishes and emulsion adhesives. Good compatibility, multi-purpose and easy addition.
Product Information of BYK 024 CAS No. 56346-34634634
Chemical composition
Mixture of bubble breaking polysiloxane and hydrophobic particles in polyethylene glycol without containing voc (< 1500ppm)
Typical materialized data
The data... morehttps://www.ericwchem.com/products/byk-024-defoamer-cas-no-56346-34634634.html
#byk #024 #msds
Silicone defoamer, voc-free, used in water-based latex paints, printing inks, varnishes and emulsion adhesives. Good compatibility, multi-purpose and easy addition.
Product Information of BYK 024 CAS No. 56346-34634634
Chemical composition
Mixture of bubble breaking polysiloxane and hydrophobic particles in polyethylene glycol without containing voc (< 1500ppm)
Typical materialized data
The data given on this data page are only typical values, not technical indicators of the product. Density (20 ° c.): 1.01 g/ml
Current status of food contact regulations
For information on the food contact regulatory status of this product, please contact our product safety department or visit www.byk.com.
Storage and transportation
Delamination May occur with this product. Please stir well before use.
Areas of Application of BYK 024 CAS No. 56346-34634634
Printing inks and varnishes
Product features and advantages
BYK-024 is recommended as an antifoaming agent for water-based printing inks and varnishes of acrylate/polyurethane and polyurethane, and can also in water-based UV systems.
Suggested dosage
0.1-1% adjuvant dosage (purchased form) is based on the total formulation.
The above recommended addition amount is for reference only, and the optimal addition amount needs to be determined through a series of experiments.
Addition method and processing guidance
The auxiliary agent can be added at any stage of production. The dosage of defoaming agent can be divided into two additions (2/3 of the dosage is added to the abrasive, and 1/3 of the dosage is added during the paint mixing stage or after completion).
Coatings industry
Product features and advantages
BYK-024 is recommended as an antifoaming agent for high gloss emulsion systems of acrylate/polyurethane and polyurethane with pigment volume concentrations in the range of 0-25. The additive can be effectively used in various standard construction methods, such as roll coating, brush coating, spray coating and pouring.
Suggested dosage
0.1-1% adjuvant dosage (purchased form) is based on the total formulation.
The above recommended addition amount is for reference only, and the optimal addition amount needs to be determined through a series of experiments.
Addition method and processing guidance
The auxiliary agent can be added at any stage of production. The dosage of defoaming agent can be divided into two additions (2/3 of the dosage is added to the abrasive, and 1/3 of the dosage is added during the paint mixing stage or after completion).
Adhesive
Product features and advantages
BYK-024 is recommended as a defoaming agent for defoaming water-based emulsion adhesives.
Suggested dosage
0.05-1% adjuvant dosage (purchased form) is based on the total formulation.
The above recommended addition amount is for reference only, and the optimal addition amount needs to be determined through a series of experiments.
Addition method and processing guidance
The auxiliary agent can be added at any stage of production.
Glass Fiber Wetting Agent
Product features and advantages
BYK-024 is recommended for defoaming of water-based fiberglass wetters.
Suggested dosage
0.1-0.3% adjuvant dosage (purchased form) is based on the total formulation.
The above recommended addition amount is for reference only, and the optimal addition amount needs to be determined through a series of experiments.
Addition method and processing guidance
The auxiliary agent can be added at any stage of production under stirring conditions.
