https://www.ericwchem.com/products/byk-028-cas-no-105-11-3.html
#105 #11 #3
Silicone defoamer, voc-free, for water-based high gloss emulsion systems and adhesives. Easy to add.
Product Information of BYK 028 CAS No. 105-11-3
Chemical composition voc-free ( < 1500ppm)
Compounds of modified polysiloxanes and polyethers, containing hydrophobic particles
Typical materialized data
The data given on this data page are only typical values, not technical indicators of the product. Density (20 ° c... morehttps://www.ericwchem.com/products/byk-028-cas-no-105-11-3.html
#105 #11 #3
Silicone defoamer, voc-free, for water-based high gloss emulsion systems and adhesives. Easy to add.
Product Information of BYK 028 CAS No. 105-11-3
Chemical composition voc-free ( < 1500ppm)
Compounds of modified polysiloxanes and polyethers, containing hydrophobic particles
Typical materialized data
The data given on this data page are only typical values, not technical indicators of the product. Density (20 ° c.): 1.05 g/ml
Storage and transportation
Delamination May occur with this product. Please stir well before use.
Areas of Application of BYK 028 CAS No. 105-11-3
Coatings industry
Product features and advantages
Byk-028 is a standard defoamer for water-based emulsion systems, and it is also the starting point for defoamer product series testing. The defoaming agent is particularly recommended for high gloss emulsion systems of acrylate/polyurethane or polyurethane with a pigment volume concentration in the range of 0-25, and is easy to add.
Suggested dosage
0.1-1% adjuvant dosage (purchased form) is based on the total formulation.
The above recommended addition amount is for reference only, and the optimal addition amount needs to be determined through a series of experiments.
Addition method and processing guidance
The auxiliary agent can be added at any stage of production. The dosage of defoaming agent can be divided into two additions (2/3 of the dosage is added to the abrasive, and 1/3 of the dosage is added during the paint mixing stage or after completion).
Adhesive
Product features and advantages
Byk-028 is recommended for defoaming of various waterborne adhesive systems.
Suggested dosage
0.05-1% adjuvant dosage (purchased form) is based on the total formulation.The above recommended addition amount is for reference only, and the optimal addition amount needs to be determined through a series of experiments.
Addition method and processing guidance
The auxiliary agent can be added at any stage of production.