cqscopeOKcqscopeOK

created a new blog entry

on January 25 at 08:16 PM public

Does the Nursing Training Manikin Have Simulated Sounds and Vital Signs?

The presence of simulated sounds and vital signs in nursing training manikinsvaries greatly depending on the model and its intended application. Here's a breakdown to help you understand. Basic...

0 0 0 0 0 0 0 0 0 0

Like

mode_comment Comment

created a new blog entry

on January 17 at 08:28 PM public

What Is the Difference Between a CPR Manikin and an Airway Manikin?

Proper training is essential in the field of life-saving skills. Two critical tools are at the heart of this training: CPR manikinsand airway manikins. However, because of their similar names...

0 0 0 0 0 0 0 0 0 0

Like

mode_comment Comment

created a new blog entry

on January 09 at 03:27 AM public

How Do I Use a Vickers Hardness Tester?

In order to guarantee precise and trustworthy results, using a Vickers hardness testerrequires carefully regulated procedures.Here's a general guide: Preparation: Choose the right test...

0 0 0 0 0 0 0 0 0 0

Like

mode_comment Comment

on January 04 at 05:32 AM public

How Do I Prepare a Sample for Vickers Hardness Testing?

A wide variety of materials, including metals, ceramics, polymers, and composites, can have their hardness determined with the help of the adaptable Vickers hardness tester. Accurate and trustworthy results from Vickers hardness testing depend on a sample that has been properly prepared. This is a detailed guide to guarantee appropriate planning:
1. Material Considerations:
Size and shape: The sample should have a flat, stable surface t... moreHow Do I Prepare a Sample for Vickers Hardness Testing?

A wide variety of materials, including metals, ceramics, polymers, and composites, can have their hardness determined with the help of the adaptable Vickers hardness tester. Accurate and trustworthy results from Vickers hardness testing depend on a sample that has been properly prepared. This is a detailed guide to guarantee appropriate planning:
1. Material Considerations:
Size and shape: The sample should have a flat, stable surface that is perpendicular to the indenter and be big enough to hold several indentations without them overlapping.
Thickness: Make sure the sample is sufficiently thick—typically at least 2.5 times the indentation depth—to prevent it from bottoming out during the test.
Cleanliness: To prevent influencing the measurement and indentation, clean the surface of any dirt, grease, or oxide layers. Depending on the material, use solvents or ultrasonic baths as suitable cleaning techniques.
2. Sectioning and Mounting (if necessary):
Sectioning large samples or difficult-to-handle materials may be necessary to obtain smaller pieces appropriate for testing. Make use of a grinder or cutting device with blades suitable for the material.
Depending on the testing setup, mounting samples in conductive or non-conductive resin can increase stability, make handling easier, and shield the edges from chipping during preparation.
3. Grinding and Polishing:
To attain a smooth and flawless finish, progressively finer grits of sandpaper or diamond abrasives should be used to grind the sample surface. For the material and required level of accuracy, the final grit should be suitable.
To achieve a mirror-like finish and remove any remaining scratches, further polish the surface with a polishing cloth and diamond paste. For metals and other reflective materials, this is especially crucial.
4. Etching (optional):
When etching a material with the right etchant, certain details about the microstructure can be revealed that are useful for understanding the hardness results. Make sure to thoroughly rinse and dry your material after using the etching method that is specific to it.
5. Cleaning and Marking:
Following preparation, give the sample one more cleaning with alcohol or another appropriate solvent to get rid of any polishing, etching, or grinding residue.
Using a fine pencil or any other non-permanent marker, mark the desired indentation locations on the sample surface to indicate the testing area. Steer clear of marking too near the edges or existing indentations.

Through adherence to these guidelines and customization to your particular material and testing requirements, you can guarantee that your samples are suitably ready for precise and dependable Vickers hardness testing.

For more information, please click：https://www.cqscopelab.com/vickers-hardness-tester

Universal, Brinell, Rockwell, Vickers Hardness Tester Supplier in China - Scopelab

The Vickers Hardness Tester can not only measure the hardness of materials from extremely soft to extremely hard but also can compare with each other.

0 0 0 0 0 0 0 0 0 0

Like

mode_comment Comment

created a new blog entry

on December 26 at 02:45 AM public

What Are Some Common Problems With Vickers Hardness Testers?

Notwithstanding their durability, Vickers hardness testersare susceptible to severalproblems that compromise the precision and dependability of their results.Here are some common problems you...

0 0 0 0 0 0 0 0 0 0

Like

mode_comment Comment

created a new blog entry

on December 21 at 02:01 AM public

How Is a Rockwell Hardness Tester Calibrated?

To ensure that your hardness measurements are accurate, you must calibrate your Rockwell hardness tester. To ensure precise readings, the performance of the machine must be compared to...

0 0 0 0 0 0 0 0 0 0

Like

mode_comment Comment

created a new blog entry

on December 13 at 08:29 PM public

How Is a Brinell Hardness Tester Maintained?

Proper maintenance of your Brinell Hardness Testeris crucial for ensuring accurate and reliable measurements. Here are some key steps to keep your tester in top condition: Regular...

0 0 0 0 0 0 0 0 0 0

Like

mode_comment Comment

created a new blog entry

on December 05 at 08:32 PM public

How Should My Lab Consumables Be Stored?

Safety, efficiency, and organization all depend on lab consumablesbeing stored properly. Here are some general guidelines to follow: It is recommended to store consumables in a clean, dry,...

0 0 0 0 0 0 0 0 0 0

Like

mode_comment Comment

created a new blog entry

on November 21 at 09:09 PM public

How Frequently Should I Change the Tips on My Pipette?

To prevent contamination and guarantee precise and reliable results, pipette tips should be replaced after each sample. This is due to the possibility that contaminants carried by the tip during...

0 0 0 0 0 0 0 0 0 0

Like

mode_comment Comment

created a new blog entry

on November 17 at 01:54 AM public

What Distinguishes Filtered from Unfiltered Pipette Tips?

Filtered and unfiltered pipette tipsdiffer in their ability to prevent aerosols from entering the pipette during liquid transfers in lab environments. As tiny liquid or solid particles suspended...

0 0 0 0 0 0 0 0 0 0

Like

mode_comment Comment

created a new blog entry

on November 15 at 02:37 AM public

How Do I Avoid Air Gaps When Pipetting?

When pipetting, it's important to keep air gaps to a minimum to ensure precise and accurate liquid transfer. Air gaps can distort your experiments' consistency and result in erroneous volume...

0 0 0 0 0 0 0 0 0 0

Like

mode_comment Comment

created a new blog entry

on November 07 at 01:01 AM public

What Are Typical Issues With Microscope Cameras and How Can I Fix Them?

High-quality pictures and videos of microscopic specimens can be obtained with powerful microscope cameras. But like any other electronic device, they occasionally have issues. Here are some...

0 0 0 0 0 0 0 0 0 0

Like

mode_comment Comment

Blogs

Recently Joined

Your Q&A contributions